70W 80w mopa M7 JPT fiber laser color marking machine

Laser marking is a marking method that uses a high energy density laser to irradiate the workpiece, vaporize the surface material or react with color changes, thus leaving a permanent mark.
Principle of laser marking color development:
1. Formation of colored oxides
2. A colorless transparent oxide film is formed, resulting in interference and color
3. At the same time, colored oxide and colorles

Inquire Now

Next Product

Product Description

1.Same Application With Normal Fiber Laser :

*High precision carving:
Laser marking machine engraving items texture fine, minimum line width up to 0.04 mm. Mark clear, durable and beautiful. Laser printed label can meet the minimum needs of huge amounts of data can be printed on the plastic parts.Better marking result, for example, more accurate, higher resolution of the QR code, compared with the embossing or jet marking way, have stronger market competitiveness.
*Low operating costs:
High marking speed ,small energy consumption, and low consumables cost. Although laser marking machine equipment investment than traditional equipment is big, but in terms of operating costs, using a laser marking machine is much lower, make you quickly
saving cost , improve benefits.

*2. Special Application:

MOPA fiber laser has a wide parameter adjustment range. Therefore, in addition to covering the processing applications of conventional nanosecond lasers, it can also use its unique narrow pulse width, high repetition frequency, and high peak power to achieve some unique precision processing applications. Such as:

(1)Application of surface stripping of Aluminum oxide sheet

When using a Q-switched laser to mark conductive positions on a thin aluminum plate, it is easy to cause deformation of the material and produce "convex hull" on the back, which directly affects the aesthetics of the appearance. The use of the MOPA laser's smaller pulse width parameters can make the material not easy to deform, and the shading is more delicate and brighter.

(2)Application of color laser marking

For this technology, only MOPA lasers can mark color patterns on stainless steel, chromium, titanium and other metal materials. When coloring stainless steel materials, the color of the surface layer of the material can be changed by adjusting the laser beam

to obtain decorative effects with different colors.

(3)Application of Anodized aluminum black

Use Mopa laser to mark black trademarks, models, texts, etc. on the surface of anodized aluminum materials. This application has gradually been widely used in the shells of electronic products by Apple, Huawei, and other electronic manufacturers in the recent

years.

Mopa Advantages Comparing With Q-Switched Laser:
Model	Q-Switched Laser	Mopa Laser
Surface stripping of aluminum oxide sheet	The substrate is easy to deform, form convex hulls, and rough shading	With small pulse width, small heat residue, no deformation of the substrate, fine and bright shading
Anodized aluminum black	Only limited quality dusting	Through wide-area parameter settings, you can mark different shades of gray, black and black processing
Metal deep carving	Strong force, suitable for deep carving, rough shading	The carving depth is weak, but the shading is fine, the taper is small, and it can be brightened
Stainless steel color marking	Need to defocus, the effect is more difficult to adjust	Various colors can be produced by adjusting the combination of pulse width and frequency
ABS and other plastic processing	The effect is prone to yellowing, the hand feels heavy and the speed is fast	No hand feeling, not easy to yellow, fine processing
Peeling paint on translucent plastic buttons	More difficult to clean	Easy to clean, clear edge contour, better light transmission, high efficiency
PCB board marking barcode, two-dimensional code	Single pulse energy is high, but epoxy resin is more sensitive to laser energy	Using small pulse width, medium frequency, bar code, two-dimensional code is clearer, not easy to remove and easy to scan

Specification		Parameter
Laser Source	RAYCUS/JPT LP/ MOPA/MAX	Laser Power	20W 30W 50W 60W 70W 80W
Laser Head	Sino-Galvo Scanning Head	Marking Speed	8000mm/s
Main Board	JCZ Control Card	Min Line Width	0.012mm
Working area	110110/150150/175175/200200 mm	Laser Wavelength	1064nm
Software	EZCAD Software	Power Supply	AC220V/110V 50Hz/60Hz
Power Supply	Taiwan MeanWell	Cooling System	Air cooling
Packed Size	119112107 cm	Marking depth	≤0.4mm(By materials)
Packed Weight	100kg	Cabinet	Portable

Details

Laser Source Optional

High peak power, high single pulse energy, and optional spot diameter. They can be widely used in non-metallic materials, such as gold, silver, copper, aluminum and non-high reflective materials such as stainless steel. In the fields of marking, precision machining, graphic engraving, etc., its marking application process is cheaper than traditional lasers and has more stable performance.

Laser Marking Machine Applications:Laser marking machines are mainly used in some occasions requiring finer and higher precision. The machine can handle all metal materials, such as gold, silver, copper, stainless steel, aluminum, etc.; and some non-metal materials.
1.Electronic Components: Resistors, Capacitors, Chips, Printed Circuit Boards, Keyboard, etc. 2.Mechanical Parts: Bearings, Gears, Standard Parts, Motor, etc.
3.Instrument: Panel Board, Nameplates, Precision equipment, etc.
4.Hardware Tools: Knives, Tools, Measuring Tools, Cutting Tools, etc.
5.Automobile Parts: Pistons&Rings, Gears, Shafts, Bearings, Clutch, Lights.
6. Daily Necessities: Handicrafts, Zipper, Key Holder, Sanitary Ware, etc.
7. Part of nonmetals such as plastic animal ear tag, ear tag marking, pig ear tag marking, pet bowl marking etc.